HISTORY- PRE-HINCKLEY
Siegfried Bettmann founded the Triumph Cycle Company in 1887 and promptly acquired premises in Coventry in which he began manufacturing bicycles. As technology advanced the company moved into the production of powered cycles in 1902. By 1905 the factory output had reached 500 motorcycles per year, with the machines being designed, manufactured and built at the Coventry site.

For the next 18 years Triumph enjoyed steady growth and in 1923 the company added automobile production to their portfolio. By 1925 the motorcycle plant in Coventry occupied 500,000-sq. ft. and employed 3000 people; with production at around 25-30,000 units per year.

The motorcycle industry remained fairly stable throughout the early 1930s, and in 1935 the decision was taken to separate the car and motorcycle divisions (the bicycle business had been sold off in 1932). In due course the motorcycle arm was sold and renamed Triumph Engineering Co.

Civilian production began again in 1946 and with supply lines open again Triumph set about re-establishing a dealer network in America. In 1951 the BSA group bought Triumph, although the Triumph marque was retained and the company remained a separate concern within the group.

Production and sales had grown steadily since the war and by 1965 the Meriden plant was producing around 800 units per week, with 80% of these destined for the USA. Production peaked in 1969 at around 46,800 units per year. In 1968 the first triple - the Triumph Trident - was produced (prior to this the company had concentrated on the manufacture of singles and twins).

By the early 70's the slow supply of parts, coupled with tooling problems led to production delays and in 1972, in a Government sponsored move, the BSA Group merged with Norton Villiers and Norton-Villiers-Triumph (NVT) was formed. In 1973 NVT announced that the Meriden plant was to close - which provoked a workers' sit in. As a result production ground to a halt and in the following year, 1974, virtually no motorcycles were built. In 1975, after much negotiation, the Meriden Workers Co-operative was formed and, with capital provided by way of a grant from the British government, production of 750cc Bonnevilles and Tigers resumed at the plant. The co-operative subsequently bought the rights to the Triumph marque from NVT and production gradually crept up to 350 units per week. Despite further support from the government the co-operative went into liquidation in 1983. 

REBUILDING THE MARQUE
The intellectual property rights to the Triumph marque were subsequently bought by John Bloor. Thus began the current era of Hinckley built Triumphs.

The new company needed a strong and stable platform from which a range of competitive motorcycles could be developed, thus the concept of the modular range was born. This concept enabled the range to share common components, thus allowing a number of different types of machine to be constructed from the same base which, crucially, could all be built on one assembly line at the same time. 

Design of the new range commenced in 1984 and by 1988 the company was ready to begin building a new factory (the old plant at Meriden had been demolished in the early 80s). A 10-acre site was purchased in Hinckley, Leicestershire, England and construction commenced. As soon as the first phase of the site was complete, pre-production began and the first models were launched at the Cologne show of 1990. Production of the first new model - the 4-cylinder 1200cc Trophy - began in early 1991, with the factory initially building 8 - 10 new machines per day. 

As production capacity steadily grew, Triumph set about re-establishing a network of export distributors. Two subsidiary companies had been established to prior to production commencing; Triumph Deutschland GmbH and Triumph France SA and over the next couple of years the network expanded to encompass most of the World's major motorcycle markets, culminating in 1994 with the creation of Triumph Motorcycles America Ltd.

By this time 20,000 new Triumphs had been built and in January 1995 the Triple Connection clothing range and the accessories range of products were launched to provide the Triumph customer with an all-round package of Triumph apparel and equipment.

Production now stood at around 12,000 units a year and as both retail sales and production capacity grew the company was able to develop more single-minded machines that did not rely on the modular concept. The first of these, the Daytona T595 and the T509 Speed Triple, were launched at the 1996 Cologne Show. The range has since diversified further with the introduction of the Sprint ST, Sprint RS and second generation Tiger.

Triumph has now produced over 90,000 motorcycles and output at the factory has reached around 100 units per day, which is the maximum that can be achieved with the existing facilities. Planning permission has been granted for a new factory on a nearby site and construction of the new plant commenced in May 1999. The new factory, which will occupy over 500,000-sq ft., will be fully operational by mid 2002 and will have a production capacity of 50,000 motorcycles per year.

CHRONOLOGY 

1984
The new company is founded and work commences on the new modular range. 

1988
The 10 acre Hinckley site is purchased and construction commences.

1990
The first phase of the factory is complete and pre-production starts.

SEPTEMBER 1990
The world launch of the first 6 models takes place at the Cologne Motorcycle Show in Germany.

FEBRUARY 1991
Production of the Triumph 4-cylinder 1200 Trophy commences.

MARCH 1991
The first motorcycles are shipped to Germany, followed by distribution in Britain.

JUNE 1991
The first 3-cylinder models, the 750 Daytona and 900 Trophy, are manufactured.

OCTOBER 1991
Further export markets including Holland, Australia and France receive their first bikes.

JANUARY-JUNE 1992
Distributors for many new export markets including Italy, Spain, Switzerland and Japan are appointed.

OCTOBER 1992
Triumph UK take delivery of the 5,000th bike produced, a Trophy 900.

OCTOBER 1992
The Daytona 900, Tiger and Sprint models are launched at the Cologne Show, Germany.

NOVEMBER 1992
The 147PS Daytona 1200 is launched at the Birmingham Show, England.

FEBRUARY 1993
Nearly 40 German dealers visit the Triumph factory to ride home the first Daytona 900/1200 models, defying snow and ice to launch the new models.

MARCH-MAY 1993
Further export markets, including Sweden, receive their first bikes.

JULY 1993
Triumph UK take delivery of the 10,000th bike produced, a Sprint 900.

SEPTEMBER 1993
The Speed Triple and Super III are launched at the Paris Show, France bringing the line-up to 10 models.

JANUARY 1994
Triumph launch in Canada at the Toronto Show.

FEBRUARY 1994
Triumph's plans to expand their production capacity into the next century are secured by the granting of planning permission for a new factory on a 40-acre site.

MARCH 1994
Triumph Motorcycles America Ltd is established and planning proceeds towards a 1995 product launch.

JULY 1994
Triumph Motorcycles return to motorcycle sport with the inaugural 'Speed Triple Challenge Race' at the British Grand Prix, Donington Park, England.

OCTOBER 1994
Triumph launch the long and eagerly awaited Thunderbird model at the Cologne Show, Germany.

Triumph re-enters the USA, completing their return to all the world's major motorcycle markets.

Triumph France take delivery of the 20,000th bike produced, a Sprint 900.

JANUARY 1995
Launch of the Triple Connection clothing and Triumph accessory ranges.

APRIL 1995
Triumph Motorcycles UK launch the Mobil One Speed Triple Race series.

JUNE 1995
Triumph Motorcycles USA launch the Transatlantic Speed Triple Challenge Race series.

New distributors are appointed for South Africa and Singapore.

AUGUST 1995
Triumph Australia take delivery of the 30,000th bike produced, a Thunderbird.

SEPTEMBER 1995
The completely restyled and redesigned Trophy 900/1200 and the all new Adventurer models are launched at the Paris Show, France.

A UK rider completes 250 000 miles on his Trident 900 - equivalent to one trip to the moon.

APRIL 1996
Triumph Australia take delivery of the 40,000th bike produced, a Trophy 1200.

SEPTEMBER 1996
Triumph launch their own Hinckley based owner's club named 'Riders Association of Triumph'.

Distributors for Malaysia and Thailand are appointed.

OCTOBER 1996
Launch of the stunning new supersports bikes, the T509 Speed Triple and T595 Daytona, at the Cologne Show, Germany.

JANUARY 1997
Production of the T500 series of models starts. They are the most eagerly awaited Triumphs ever produced. 

MARCH 1997
Triumph UK take delivery of the 50,000th bike produced, a Daytona T595.

MAY 1997
Nick Sanders completes the fastest ever journey around the world on a motorcycle - 19,930 miles in 31 days 20 hours on a Daytona 900. 

SEPTEMBER 1997
Thunderbird Sport and Sprint Executive launched at the Milan Show, Italy.

OCTOBER 1997
Triumph is awarded Motorcycle Manufacturer of the Year by the Motor Cycle News. 

NOVEMBER 1997
Triumph USA take delivery of the 60,000th bike produced, a Thunderbird Sport.

MARCH 1998
A T595 wins the Pro Thunder race at Daytona Race Week.

MAY 1998
Aimed at both novice and experienced riders, the new Legend TT is launched.

JUNE 1998
Triumph France take delivery of the 70,000th bike produced, a Trophy 1200.

SEPTEMBER 1998
At the Munich show, Triumph unveils the new Sprint ST and a completely redesigned Tiger.

JANUARY 1999
Triumph America take delivery of the 80,000th bike produced, a Daytona 955i.

APRIL 1999
Construction of the first phase of Triumph's new factory begins.

JULY 1999
The 90,000th bike rolls of the production line - an Italian Speed Triple.





©2012 Triumph Capitol Sports Center • Web Services: Dogwood Productions, Inc.